
Intro
The VOOPOO ARGUS P3 looks more like a tiny smartwatch with a mouthpiece than your usual pod kit. It has a full touchscreen, adjustable power and enough menus to keep you occupied for a while.
But do you really need all that on something you pick up for a few puffs?
I usually prefer a simple pod kit that slips into my pocket without much thought. The P3 interests me because it manages to squeeze a large screen, a decent battery and VOOPOO’s new Snap pods into a remarkably small body.
The question is whether the screen makes everyday vaping easier or just gives you another thing to fiddle with.
Build Quality & Design
The ARGUS P3 is a small, square device measuring roughly 51 mm wide, 61 mm tall without the pod, and 21 mm thick. At 82 g, it’s light enough to carry about, although the wider shape feels very different from a slim, pen-style pod kit.
There’s a zinc alloy frame with leather finishes available in several colours, along with a separate metal edition. The rounded corners and compact shape make sense for something designed to sit in your palm.
Most of the front is taken up by a 2.01-inch colour touchscreen. It’s bright, clear and responsive, with the sort of swiping and tapping you’d expect from a small smartphone.
Press the side button to wake it, swipe up to unlock it, then swipe left to reach the power settings.
You can adjust the output between 5 and 30 watts, check your puff history and save three custom power curves. There’s also an Eco mode and a choice of animated displays and clock faces.
I can see the appeal of having the battery level and power settings clearly displayed. What I’m less keen on is having to unlock a screen when I just want to change the wattage.
Most of the clock faces also have to be unlocked by reaching certain puff counts. That seems unnecessary to me, especially when a clock face doesn’t make the kit perform any better.
The screen itself deserves some care. One extended test found that it developed small scratches after a few weeks despite careful handling, although that doesn’t establish how every unit will wear.
There’s an adjustable airflow slider on the side. It gives you fine control over the draw, but the small control can feel stiff and the air inlet sits where your finger can somtimes cover it when you’re holding the device.
The new ARGUS Snap pods are a more practical addition.
Instead of pulling the pod out whenever you need to refill it, you can lift off the mouthpiece and fill through the opening underneath. A red silicone seal helps keep the liquid where it belongs.
It’s a simple arrangement, and one I’d welcome on more pod kits.
The downside is that the lower part of the pod sits inside the device. Once the liquid drops below the visible section, you’ll need to pull the pod out to check exactly how much is left.
You get two Snap pods in the box, one 0.7 Ω and one 0.4 Ω, along with a USB-C cable.
The P3 also works with the wider ARGUS pod family, which is useful if you already have compatible pods from another VOOPOO kit.
Performance
The two included pods give the ARGUS P3 quite different characteristics.
I’d start with the 0.7 Ω pod and the airflow partly closed. It’s the better choice if you prefer a mouth-to-lung draw, where you pull the vapour into your mouth before inhaling.
Close the slider further and the draw becomes more resistant. It can get fairly tight, although someone looking for a very restrictive cigarette-style pull might still want a little more resistance.
The 0.7 Ω pod produces a gentler, slightly cooler vape than the lower-resistance option. That’s the one I’d favour for a fruity liquid when I want the flavour without too much heat.
If you prefer a fuller, warmer puff, the 0.4 Ω pod is where the P3 becomes more interesting.
Open the airflow and increase the power towards the upper end of its range, and it produces the denser vapour you’d expect from a restricted direct-lung setup. You get a noticeably different experience without changing the device itself.
The important thing is that both pods have a useful range rather than forcing you into one particular draw.
Flavour performance is another strong point. Independent tests have found both Snap pods capable of producing clear, concentrated flavour, with the 0.4 Ω option offering more warmth and the 0.7 Ω pod providing a more restrained result.
Pod life also looks promising.
Both resistances lasted around a week of heavy use in one test, while a separate extended trial reported consistent flavour from the 0.7 Ω pod after sixteen refills. Those are encouraging results, though the liquid, power and frequency of use will make a difference.
VOOPOO makes much bigger claims about pod longevity and leak protection. I’d treat those as manufacturer targets rather than assume every pod will last that long.
The published tests provide some reassurance, with clean operation and good resistance to leaking reported during their test periods. That doesn’t make the pods leakproof, so I’d still check the contacts occasionally and wipe away any condensation.
As for the touchscreen, it doesn’t have to become part of your routine.
Once you’ve chosen a wattage and airflow setting you like, the P3 is draw-activated. You can leave it alone and simply take a puff when you want one.
There’s also a custom power-curve feature that lets you change how the output behaves during the first five seconds of a draw.
It’s an interesting option if you enjoy adjusting every part of your vape, but I suspect most people will find a normal wattage setting they like and leave it there.
Battery Life & Charging
The P3 has a built-in 1,500 mAh battery, which is a useful amount of capacity for something this small.
With the 0.7 Ω pod at moderate power, getting through a day without charging is realistic. Some testing has produced considerably longer runtimes, although that depends on how often and how long you vape.
Use the 0.4 Ω pod at higher power throughout the day and you’ll get through the charge faster.
I like being able to see the actual battery percentage on the screen. It’s much more useful than trying to work out whether a coloured light means I’ve got enough charge left to go out.
Charging is handled through USB-C at up to 5V/2A.
VOOPOO quotes around 40 minutes for a full charge, and one independent timed test reported a similar result. That’s particularly handy if you’ve forgotten to charge it before leaving the house.
The display shows charging information, but it doesn’t stay illuminated throughout the process. You’ll need to press the button if you want to check its progress.
For the way I normally use a pod kit, the combination of a decent battery and a relatively short charging time would be one of the P3’s strongest features.
I’d still pay more attention to my chosen power setting than to any promise of getting several days from a charge.
Pros
- Clear, responsive touchscreen with useful battery and power information
- Very compact body with a solid frame and attractive finishes
- Two included pods covering mouth-to-lung and restricted direct-lung vaping
- Good flavour performance with encouraging pod-life results
- Easy top-filling without removing the pod
- Adjustable airflow and compatibility with other ARGUS family pods
- Useful 1,500 mAh battery with quick USB-C charging
Cons
- Touchscreen takes some getting used to and may be prone to scratches
- Changing simple settings involves more swiping than on a basic pod kit
- Airflow slider can be fiddly and the inlet is easy to cover with a finger
- Need to remove the pod to see the remaining liquid clearly
- Most clock faces are locked behind puff-count milestones
- Higher-power vaping will shorten the time between charges
Verdict
The more I look at the ARGUS P3, the more I think its best feature isn’t the touchscreen at all.
It’s the combination of the compact body and the Snap pods.
Being able to refill without removing the pod, choose between a tighter or looser draw, and get good flavour from either option makes this a capable everyday kit. The battery and charging performance give it another practical advantage.
The touchscreen is well executed, but I’m not convinced I’d make much use of everything it offers.
I’d probably choose a clock face, set the power once and forget about the rest. Having detailed puff records and custom power curves is nice, but neither would persuade me to carry a device I didn’t already enjoy using.
The screen’s tendency to pick up scratches would bother me more. It’s the part you look at every time you use the controls, so I’d want it to stay in good condition.
For someone who enjoys adjusting their settings, the P3 makes a lot of sense. It gives you much of the control you’d expect from a larger device without taking up nearly as much pocket space.
If you’re happy with a basic refillable pod kit, though, I don’t think the extra features are a compelling reason to change.
That’s particularly true if you already own an ARGUS P2. The newer Snap pods are compatible with it, so you don’t need to replace the whole kit just to try them.
Personally, I’d lean towards a simpler, slimmer device for carrying around all day. I prefer being able to adjust things quickly without working through a touchscreen.
But I wouldn’t dismiss the P3 as a gimmick.
Underneath all the animations and watch faces is a very capable pod kit with good flavour, adjustable airflow, convenient filling and a battery that suits everyday use.
If you like the square design and genuinely want the touchscreen controls, there’s plenty here to enjoy. Just make sure it’s the vaping experience you’re interested in, rather than the novelty of having a little screen in your pocket.
